Critically appraise the contribution of Le Grand's knights, knaves, Essay

Critically appraise the contribution of Le Grand's knights, knaves, pawns and queens framework to our u - Essay Example In support of his theory, Le Grand provided the following example: in the ‘classic’ era of the welfare state (1945-79), presumed that the motivation of the public servants was their professional ethic and the interests of those they served were of great concern to them. They appeared as public-spirited altruists (or knights) as they carried out their duties in the public interest. Taxpayers came out in the same light as the public servants because of their willingness to pay taxes. However, as per Le Grand’s theory, after 1979 the public experienced grave assaults on assumptions about motivation and behavior. There was the presumption that the public could understand the behavior of public officials and professionals if they appeared self-interested. Ultimately, it seemed objectionable that the beneficiaries of services received treatment as passive recipients-rather the consumer should be the king (Le Grand 1997). This paper examines the worth of Le Grand’ s contribution in ‘knights, knaves, pawns and queens’. This is in regards to the framework of our understanding of relationships between public authorities and organizations, which provider public services paid for. In that line, this paper looks at the merits and shortcomings of Le Grand’s contribution. ... such policies, two central questions that need answers: 1) Are public employees driven by primary self-interested motives or are they public-spirited altruists? 2) Do the recipients of services posse some capability to influence their situations or are their situations merely the product of broader social circumstances? (The ABCs of public service motivation, altruism, behavior, & compensation 2011) Logically he contends that the pay and incentive systems that stimulate the government servants enthusiasm should be formulated in such a manner that it is tough to both types of behavior; and that outsourcing of public sector work to non-profit bodies should not assume that these organizations are purely altruistic (Andrew 2004). This is one of the key contributions of this model that many scholars and researchers received well in this field of study. Flaws in Le Grand’s theory Le Grand’s contribution, since its introduction, has undergone remarkable scrutiny to date. Many scholars and institutions, in this field, have acknowledged, expanded or criticized this framework. The following are some of the issues that arise to challenge and expose the inadequacies that are in the model. Simplicity of the model raises a lot of concern. Many argue that his analysis is too simplistic a means of capturing the complexity of the realities of human motivation and agency. As there is a variety of knights and knaves, and people are not simply pawns or queens (Welshman 2004). For instance, knights exist in two types. The first type, act-relevant knights receive personal gratification from performing an altruistic act. The second type act-irrelevant knights receive personal gratification when those who need help receive it, regardless of who actually performs the helping act (The ABCs

Issue 18&19 Coursework Example | Topics and Well Written Essays - 750 words

Issue 18 - Coursework Example Memphis University scholars suggest that overseas outsourcing have more advantages to an organization. For instance, it enables the firm to pursue the most labor cost. Labor cost varies significantly from one country to another. Therefore, outsourcing will allow the company to choose the country that it feels that its work is not very costly (Axelrod, 2004). Moreover, adopting lower labor cost will enable the organization to produce its services at a lower cost and as well provide services at more reduced prices. Finally, reduced Labor allows the organization enhances their business profits. Because of deferent perception to outsourcing, it can create a platform for politics. For instance, many argue that outsourcing causes the jobs that can be done by the locals to move overseas. On the other hand, outsourcing will also help the particular country to boost its domestic economy. On the contrary, practitioners argue that offshoring can have the local options (Müller & Müller, 2000). Firms seek to offshore labor in order to keep labor cost at a minimum level as possible, so as their services and products can reach their potential customers at a lesser cost. From an international point of view, countries outsource professional jobs to countries that have the most cost efficient labor. The most popular outsourcing countries are China and India. Employees in these countries have adequate educational backgrounds to enable them to carry successfully out the tasks ahead of them. However, outsourcing has its merits and demerits that firms and countries need to put into consideration before starting the exercise. Outsourcing allows the company to operate in an increasingly competitive marketplace across the world. In addition, outsourcing enables the firm provides service and products in 24 hours daily, more so to the customers who need around the clock

To Build or Buy Assignment Example | Topics and Well Written Essays - 1250 words

To Build or Buy - Assignment Example The food items which are unique and entirely different from the competitor’s coffee shop would be included. There would be no sale of alcoholic beverage as the business as a theme of healthy food .There would be more of vegetable salads and fruit salads on the menu. A brand image would be created so that there would be a great impact on the consumers. A brand image would be created by giving an apt name to the coffee shop. The name would be â€Å" natura coffee shop†. This would give a touch of nature and healthy image to the business. The name of the shop is different from the Deli and can attract customer due to curiosity. It also aligns with the food sold in the coffee shop. The price of food will be reasonable as people stay away from organic food because they are expensive. The portion would be bit more and that would be a good competitive strategy to win over â€Å"Ohio Deli†. People are always gets attracted to food that deliver much more than what they pay for. As per (Miles, 2014) â€Å"Quick-service consumers, now more than ever, want to get more for their dollar, and quite often the bigger the portion the better†. The theme of the coffee shop would also be organic as we would use any synthetic decoration in the coffee shop except from the appliances. The ambience would be entirely different from â€Å"Ohio Deli†. The coffee shop would have promotional offers which would like to entertain the customer potential. The staff of the coffee shop would be young and extra polite. They would be trained to be exceptional for customer service. We also would provide food and atmosphere which is hygiene and free of pollution. A quick service will be another strategy which would keep the interest of customer in the coffee shop. Many a times customer hesitate to come back if the service is slow as the customer are employee who come for breakfast and lunch. We would introduce loyalty cards to impress the customer s

What are the advantages and disadvantages of independence in Education Essay

What are the advantages and disadvantages of independence in Education - Essay Example On the other hand, the study of Raban (2001, 34) showed that â€Å"along with the cognitive growth, social opportunities influence learning; indeed, learners of all ages are more motivated when they can see the usefulness of what they are learning and when they can use that information to do something that has an impact on others†. It should be noticed however that the personal development of children (or adults) participating in a specific educational site is not an easy task. In fact there are many issues that need to be considered both by the legislators and the schools’ administrators regarding the presentation of appropriate patterns to children and adults that participate in specific educational programs. An issue that usually arises in this context is the role of ‘independence’ in education and its possible influence in the cognitive development of children and adults. Current paper examines the issue of ‘independence’ (especially its ad vantages and disadvantages) as it can be observed in educational sites around the world referring indicatively in certain forms or types of ‘independence’ as they have been identified and evaluated by academic researchers in the particular sector. Relevant results of empirical researches made in this area – whenever their retrieval was possible – are also going to be presented in order to support the credibility of the assumptions made on the particular issue. In order to examine the issue of independence in education we should primarily refer to the role of participants in educational sites regarding the delivery of the curriculum and the cognitive approaches developed in these sites in general. The involvement of personal attitudes and of the human factor has been found to be crucial for the formulation of an appropriate strategy by the school administrators when communicating with learners. Regarding this issue, it is noticed by Skrtic et al. (1991)

Microeconomic issue- halo effect Essay Example | Topics and Well Written Essays - 750 words

Microeconomic issue- halo effect - Essay Example nsumers tend to associate the positive quality of a personality’s image with a product and its brand, and since consumers have aspirations and desires, the seller hopes that the image associated with the product is powerful enough for the consumer to take action; first, to desire the satisfaction associated with the image, and second, to think that the product and brand linked to the image would be the means to achieve that satisfaction. This association between a person’s reputation and his words and actions is what the Halo Effect is all about (Economist.com). Thorndike in a 1920 study observed the Halo Effect at work in a study involving soldiers and the way they rated their officers. He discovered that when soldiers viewed their officer in a positive way, all the officer’s actions are viewed positively. This is the way a son would treat the punishment from a father whom the son admires: every punishment is for the son’s good, no matter how unjust the punishment may seem to an outside observer. Applied to microeconomics and the behavior of firms and consumers, the halo effect can be observed at work in many instances. In fact, the global economic crisis may have been caused by the halo effect, and the same halo effect is being used to get the world out of the crisis. Rosenzweig, writing in the McKinsey Quarterly, observed how the halo effect could explain both business success and failure, emphasizing the importance of consumer or observer perception in determining economic behavior. Among the horror stories associated with the crisis, the investment scam of Madoff shows how the halo effect contributed both to his success and failure. Madoff was an investment banker who served as the Chairman of NASDAQ, the over-the-counter stock market that boomed in the late 1990s. According to the New York Times, Madoff was able to head NASDAQ because of his high-profile lifestyle and low-key consistency in generating above-average returns for investors. His

Literary Devices Essay Example for Free

Literary Devices Essay Alliteration Repeating the same letter or sound at the beginning of adjacent or closely connected words. AllusionA figure of speech that makes a reference to, or representation of, people, places, events, literary work, myths, or works of art, either directly or by implication. BildungsromanA type of novel concerned with education, development, and maturation of a young protagonist. Essentially, a Bildungsroman traces the formation of a protagonists maturity (the passage from childhood to adulthood) by following the development of his/her mind and character. Breaking the fourth wallAn author or character addresses the audience directly (also known as direct address). This may acknowledge to the reader or audience that what is being presented is fiction, or may seek to extend the world of the story to provide the illusion that they are included in it. An example is found in the film Ferris Buellers Day Off when the main character speaks to the audience by looking directly into the camera. Chekhovs gunInsertion of an apparently irrelevant object early in a narrative for a purpose only revealed later. See foreshadowing and repetitive designation. Cliff-hangerThe narrative ends unresolved, to draw the audience back to a future episode for the resolution. Deus ex machina (From Latin: a machination, or act of god)Resolving the primary conflict by a means unrelated to the story (e. g. , a god appears and solves everything). This device dates back to ancient Greek theatre, but can be a clumsy method that frustrates the audience. This has come to mean that a force steps in to save the day or a helicopter shows up just as the hero must jump off a building. EpiphanyA sudden revelation or insight—usually with a symbolic role in the narrative—in a literary work. First Person NarrationA text presented from the point of view of a character (esp. the protagonist) and written in the first person. Oftentimes, the first-person narrative is used as a way to directly convey the deeply internal, otherwise unspoken thoughts of the narrator. Occasionally this narrator can be seen as unreliable. In some cases, the narrator gives and withholds information based on his/her own viewing of events. It is an important task for the reader to determine as much as possible about the character of the narrator in order to decide what really happens. Important note: See page 4 for point form recap. Flashback (or analeptic reference)General term for altering time sequences, taking characters back to the beginning of the tale, for instance Flash-forwardAlso called prolepsis, an interjected scene that temporarily jumps the narrative forward in time. Flash forwards often represent events expected, projected, or imagined to occur in the future. They may also reveal significant parts of the story that have not yet occurred, but soon will in greater detail. This has been highly popularized by several television shows. ForeshadowingHinting at events to occur later. See also Chekhovs gun. Frame story, or a story within a storyA main story that organizes a series of shorter stories or a short story that is used within another to add meaning to the other. Framing deviceA single action, scene, event, setting, or any element of significance at both the beginning and end of a work. HamartiaThe character flaw or error of a tragic hero that leads to his downfall. HyperboleExaggeration used to evoke strong feelings or create an impression which is not meant to be taken literally. ImageryForming mental images of a scene using descriptive words, especially making use of the human senses. In medias resBeginning the story in the middle of a sequence of events. The Iliad and the Odyssey of Homer are prime examples. The latter work begins with the return of Odysseus to his home of Ithaka and then in flashbacks tells of his ten years of wandering following the Trojan War. IronyThis discrepancy between expectation and reality occurs in three forms: situational irony, where a situation features a discrepancy between what is expected and what is actualized; dramatic irony, where a character is unaware of pivotal information already revealed to the audience (the discrepancy here lies in the two levels of awareness between the character and the audience); and verbal irony, where one states one thing while meaning another. The difference between verbal irony and sarcasm is exquisitely subtle and often contested. The concept of irony is too often misunderstood in popular usage. Unfortunate circumstances and coincidences do not constitute irony (nor do they qualify as being tragic). Readers note: â€Å"Isnt it ironic? † by Alanis Morisette contains several examples, but many of them are not ironic at all. JuxtapositionUsing two themes, characters, phrases, words, or situations together for comparison or contrast Narrative hookStory opening that hooks readers attention so hey will keep reading OverstatementExaggerating something, often for emphasis (also known as hyperbole) OnomatopoeiaWord that sounds the same as, or similar to what the word means, e. g. , boom or squish OxymoronA term made of two words that deliberately or coincidentally imply each others opposite, e. g. terrible beauty ParadoxA phrase that describes an idea composed of concepts that conflict. A good example occurs in the first sentence of A Tale of Two Cities by Charles Dickens: It was the best of times, it was the wo rst of times† (1). ParodyRidicule by overstated imitation, usually humorous, as in MAD Magazine Pathetic fallacyReflecting a characters (usually the protagonist) mood in the atmosphere or inanimate objects—for example, the storm in William Shakespeares King Lear, which mirrors Lears mental deterioration. PathosEmotional appeal, one of the three modes of persuasion in rhetoric that the author uses to inspire pity or sorrow towards a character—typically does not counterbalance the target characters suffering with a positive outcome, as in Tragedy. PersonificationUsing comparative metaphors and similes to give living characteristics to non-living objects. Plot twistUnexpected change (twist) in the direction or expected outcome of the plot. Poetic justiceVirtue ultimately rewarded, or vice punished, by an ironic twist of fate related to the characters own conduct Self-fulfilling prophecyPrediction that, by being made, makes itself come true. Early examples include the legend of Oedipus. There is also an example of this in Harry Potter. SatireThe use of humour, irony, exaggeration, or ridicule to expose and criticize peoples stupidity or vices. Sensory detailImagery, sight, sound, taste, touch, smell Stream of consciousnessTechnique where the author writes down their thoughts as fast as they come, typically to create an interior monologue, characterized by leaps in syntax and punctuation that trace a characters fragmentary thoughts and sensory feelings. An example is Ulysses. SymbolismApplied use of symbols: iconic representations that carry particular conventional meanings.

Manufacturing Process of Bricks

Manufacturing Process of Bricks A brick has been a common construction material used everywhere for more than 6000 years, and has been in various shape, sizes and were made by mixing many different type of materials, each of them having their own advantage and disadvantage; and formed the basic structure and the back bone of many civilisations and was used in a wide range of buildings in centuries from building palaces, housing factories, in tunnels construction, water ways, bridges, making it the oldest manufactured building material. For centuries, the brick making process was done by hand, and involved clay being moulded and then dried in the sun until the industrial revolution when the process turned to mechanization. Today technological and mechanical advancement has helped to have a more complete knowledge of the raw material and its properties, and better control of firing, improvement in the kiln designs, all have contributed to the advancement of brick quality and has made contemporary bricks more efficien t and has improved the overall quality of the products. Today, brick is found in various materials and made in various shapes depending on the use. There are concrete brick, calcium silicate brick, clay brick and Adobe brick. See Appendix 1 This report will be looking at the technology associated with the manufacturing process of automated and traditional soil clay brick, adobe brick plain mud brick which are still use today in certain part of the globe or sometimes and slump brick- and the future of brick. PART ONE MANUFACTURING PROCESS OF AUTOMATED BRICK The first stage in the manufacturing process of the soil clay brick start with the selection of the raw material. RAW MATERIAL The main raw material in brick making is clay and it is one of the most abundant natural mineral materials on the planet. On earth, there is a wide range of clay which varies considerably in physical properties, colour, hardness and mineralogical content; making it difficult to pinpoint particular clay and say this is the best clay for brick making but they do, however, have certain properties in common. PROPERTIES and TYPES OF CLAYS Clay is complex material as individual, and their deposits is unique due to their specific modes of formation and physical characteristics, and are rarely present as pure minerals but rather are mixtures of the different clay types of one group or type normally being dominant. But the Clay entering in brick manufacturing must possess and fulfil some specific properties and characteristic such as the ability to be crushed and mixed with water to form a plastic material which can be moulded into various shapes; shrinkage or swelling percentage on firing, meaning when subject to appropriate temperatures the clay particles must fuse together; the bloating characteristics, meaning the percentage of water absorption; firing colour, meaning the colour of the brick after drying and percentage of fines produced upon crushing and fire strength and these physical properties determine their commercial value. The clays from which burnt bricks are made may be divided into three principal types, all of which have similar chemical compositions but different physical characteristics. They are: 2. A Surface Clays also called Alluvial and Drift Clays Found near the surface of the earth, may be the up thrusts of older deposits or of more recent, sedimentary formation; are readily worked and require little preparation. 2. B Shale clays or rocky clays Shale is sedimentary deposits clays that have been subjected to high pressures until they have hardened almost to the form of slate which are often difficult to work and necessitate the use of heavy machinery to extract but, may be brought into plastic condition by long weathering (i.e. by exposure to rain, frost and sun) or by crushing and grinding in water, and they then resemble ordinary alluvial clays in every respect. 2. C Fire Clays Fire clays are usually mined at deeper levels of the earth than other clays where they form the bed layer under seams of coal and have refractory qualities and a high degree of resistance to heat. MANUFACTURING PROCESS The process of making clay brick is generally uniform, although manufactures tailor their production to fit their particular raw materials. In general, the manufacturing process consists of essentially of six stages: Mining and Gathering raw materials Preparation of raw material (crushing, grinding, screening and mixing the raw materials) Making of the brick or Forming Process (forming, cutting and coating) Drying Curing ( firing and cooling) Packaging and storing Diagram of the industrial manufacturing process of clay bricks MINING and GATHERING RAW MATERIALS The choice of the mining method of clay will depend on the kind of clay, on the depth, thickness, hardness and physical geology of the clay location under the ground. The general method of extracting clay from the quarry is once or twice a year using heavy plant machinery to stock pile large amounts, so to ensure continuous brick production regardless of the weather conditions and because clays are rarely present as pure minerals but rather mixtures of the different clay types; laboratory testing of the clays from different parts of quarry will determine the characteristics of the layers and will be stock in separate different categories which will facilitate the blending of the raw materials. PREPATION OF THE RAW MATERIAL In the manufacturer, the clay rock is crashed and reduced in smaller particles, and then the material produced is screen through an inclined vibrating screening machine to control the particle sizes prior to water being added. During the screening, manufactures adjust and compensate the different variations in chemical composition and physical properties by blending clays from different locations and sources to fit their standard of the end product. Consequently, to fulfil their requirements of perfect clay for bricks making, or for the composition of the raw material to fulfil their standard, the different mixes and proportions of clay and chemical are blended together, prior to add water, as which of them affect the working properties of clays causing them to vary in their behaviour affecting the properties of the final product. At the same time, manufacture has standardized their end product and their manufacturing processes to limit variations in the processing and the inconsistency in end product. For instance, a clay brick that when cure turn white may be developed commercially because, by adding various minerals like oxide of iron will affect the propriety of the brick in such a way that when cure it will produce a red brick if also there is consistency in the manufacturing processes. Example: Clay containing from 5 to 8 % of oxide of iron will, under ordinary conditions of firing, produce a red brick; but if the clay contains 3 to 4% of alkalis, or the brick is fired too hard, the colour will be darker and purple. An excess of Alumina compound tending to make the colour lighter and brighter. FORMING OF THE BRICK The first step in forming process is to produce a homogeneous plastic clay mass work up into proper consistency by adding water to clay in a mixing chamber with one or more revolving shafts with blade extensions. After the kneading, the plastic clay mass is ready for forming. There are three different methods of shaping and forming brick: the stiff-mud process or extrusion process 6. A. The stiff-mud process or extrusion process In the stiff-mud process or extrusion process, the clay is mixed with just enough water to produce clay plastic mass with water in the range of 10 to 15 percent of the clay mass. Next, the clay is extruded through a die, producing a horizontal column of clay which passes by conveyor belt through an automatic wire cutter to create the individual brick. The cutter spaces and die size are precisely calculated to compensate for shrinkage during drying and firing. 6. B. Soft-mud process In the soft-mud process or moulded process, the clay contains too much water to be extruded. The plastic clay mass contain 20 to 30 percent of water per mass is used to produce brick either by hand or machine. In the machine driven soft-mud process, standard brick are produce in mass quantities as the machine replicate the hand-making process much quicker. 6. C. Hand making In the simplest form which is done by hand, the craftsman will produce one brick at the time by stuffing a lump of soft clay in a mould and the excess clay is stuff from the top of the mould and the brick is turned out. The mould is lubricated with either sand or water to prevent the brick from sticking in the mould. 6. D. The dry-press process In this process hydraulic or compressed air rams is used to press clay with very low plasticity, containing no more than ten percent of water by weight, into steel moulds under pressures from 500 to 1500 psi creating a very compact and dense brick. DRYING PROCESS Prior to the brick to be fired in the kiln, after the brick is formed using any of the method describes above, it containing 7 to 30 percent of moisture, depending upon the forming method. This moisture must be removed prior to the brick can be fired in the kiln otherwise, there will be formation of scum and certain mechanical defects from occurring or the brick will explode when the brick is subject to the intense heat of the kiln. This drying process which last about 18 to 40 hours, is normally done by placing the green brick in enclosed dryer which utilize excess heat supplied from the exhaust heat of kiln to maximize thermal efficiency. To ensure good result, devices are installed to measure and control humidity in the drying facilities. A. Firing After the drying, the brick are fired in furnace chamber called kiln for 10 to 40 hours, where there are subject to a temperature of ranging between 100 to 1200 degrees centigrade depending on clay type or material used and the type of finished brick required. During the process, clay particles and impurities will undergo changes as the temperature in the kilns rises. The remaining water in the brick will dry up or evaporate; unlike the metal, clay softens slowly and melts or vitrifies gradually in rising temperature. The clay molecules mass breaks down becomes soft enough to stick together; the mass becomes tight, solid and non absorbent giving the brick it texture and colour. To ensure a good product and avoid the brick to be deformed due to heat also called viscous fusion, kiln is fitted with sensors to control the temperature in the different stage the firing process. 7.A.1. What is a Kiln? In brief, kilns are just containers for heat; fuelled by natural gas, coal, sawdust, and methane gas from landfills or a combination of these fuels. There are many different types of kilns but the most common types are the continuous kilns (tunnel) which are always firing; they never cool and are capable of turning out large quantities of bricks at steady constant rate and the periodic (intermittent) kilns which are fired on an intermittent schedule. http://www.pottery-magic.com/pottery/history/bottle_kiln.htm PACKAGING Following the firing process is the packaging but prior to that the bricks are gradually cool down, for 10 hours for tunnel kiln and form 5 to 24 hours in periodic kiln, as the rate of cooling affect directly the final colour of the bricks. After the brick has cool downs, there are unload from the kiln; sorted, graded, packaged and place in a storage yard or loaded rail cars or truck of delivery. PART TWO MANUFACTURING PROCESS OF ADOBE CLAY BRICK The adobe brick, this type of earthen building materials has been around since the beginning of civilisation and has been the main building material for most of the civilisation. In our day, Adobe are mostly used in hot and dry climates and become the characteristic of the third world. Although this is a very old material, it manufacturing process hasnt change since. As with the soil clay brick the main ingredient which enter in the manufacturing process is clay and the manufacturing process start with the choice of the raw material. SELECTION OF RAW MATERIALS Adobe brick are made from a mixture of mud or clay and small pieces of straw or reeds, and are formed by hand and left in the sun to dry. The secret of make adobe bricks lays on the choice of the type of clay to use as it is made of surface clay soil. Although the bricks are made in rural area where there is no sophisticated laboratory for testing but prior using the clay it has to be tested. The testing of the clay can be done by filling 2/3 of a graded glass jar with the clay you plan to use, and then fill the jar with water and put a lid on. Shake the jar for about two minutes making sure the clay is totally mix up with the water then let the jar and the mix to sit overnight. After about 24 hours, examine the jar and its content; the clay would have broken up into two distinct bands of sand on the bottom and clay on the top. There should not be more clay than sand on the ration of 30 percent clay and 70 percent sand for an ideal adobe brick making clay. EQUIPMENT NEEDED Clay soil Measuring Tape Hammer Hand Saw 24 timbers Nails Shovel Bucket Water Straw PREPARATION OF BRICKS After selecting the clay, an area must be clear prior to start making bricks and a shed to protect the newly made against the rain as it can take a couple of days for them to dry. In the nearby, dig a hole of about 3 to 4 feet long, 2 to 3 feet wide and 2 to 3 feet deep as a mixing pit for the different ingredients. Then fill the hole with water and let it drain out as this will strengthen the wall of the hole for it not to crumble while mixing the clay soil. This will take at least a day to dry out.  Make mould of the bricks using timber. The traditional size is 4 by 10 by 14 inches and this is made with 2 by 4 studs nailed into a ladder like shape. MAKING ADOBE BRICKS Once the water in the pit has dry out, fill the pit halfway with the clay soil then add water gradually as mixing with the feet our shovel until the mix is stiff. Straw can be added to reinforce the mix but it is not necessary.Fill the mould using a shovel or hand thenlevel off the excess with the shovel or with a straight edge, makingsure there are no air pockets or gaps.  Let the bricks set and then gently remove the mould from them leaving the wet adobe bricks to dry for several days (at least three) before handling. Wash the mould and repeat the process in a different area. DRYING PROCESS Leave the adobe brick where they are while they dry in the sun for several days before turning them on the edge to completely dry out and harden and put under the shed so that the drying time can continue. When the edges turn white, they are ready to be moved, but not used. This process could take at least 3 weeks prior the brick is use. PART THREE THE FUTURE OF CLAY BRICK As the world population is growing especially in developing countries, there is a need of urbanisation to accommodate this populace meaning more bricks are needed to answer to this demand of infrastructure development. With the growing problem of energy price soaring, with the world running out of fossil fuel, with the reduction of deforestation which encourages the expansion of the desert, the clay brick industry is now facing an energy crisis and this crisis is affecting and will affect everyone. In the developed country, it is affecting the price of the accommodation and the house price while in the developing country it is leading to the impoverishment of many. This crisis resound as called for innovation by funding a new way of making new type of clay brick or improving the firing process by a new design of kiln aiming to reduce energy consumption by minimizing the energy required by the process as firing time and temperature in the kiln are the two key factors which contribute in the making of solid brick. In the developed country, electricity and fossil fuel are use as the main fuel source for brick firing as they are abundant. Founding other alternative to these sources of energy could be the way forward. But investing in nuclear power will raise an environmental issue of dealing with the nuclear waste; investing in the renewable energy will be a gamble in the way that, most of this technology are still in embryonic state and will require funding a good spot to install them and a big area to cover to be able to produce enough energy necessary to power this industries such investment will impair on the price of brick. It will mean also to divert energy which will be helpful to thousand household into industry. UNFIRED CLAY BRICK The way forward will be probably in reducing the energy consumption by designing better kiln and improving our knowledge of the minimum energy required by the process as unnecessary prolonged firing time and too high temperature will eventually consume more energy but minimum firing temperature and shortening firing time do not only reduce energy but also increase the productivity. In the developing country, this crisis reverberates as called for innovation, finding an alternative for curing clay brick as they are facing desertification. Curing is done, depending on the area, by fire wood, rice husk and maize cob or residue as main fuel sources for brick firing because they are abundant in developing country. Even though other agricultural waste such as saw dust and oil palm shell are used as substitute for wood, a new design of kiln is necessary to cope with the small size of fuel. If thinking in term of innovation in finding a new way of making clay brick, the new brick should be energy efficient in manufacturing process especial if cure through a kiln. Although the adobe clay brick may seem to be the answer but this brick however is not very strong or durable and tend to crack on drying. But one of the modern additions is to compensate this weakness by mixing soil clay with sand and stabilizing it with 4 to 8 % of cement or gypsum and then compress these materials in a given mould form, which results in strong and durable bricks, which do not crack. This is done with simple and yet innovative manually or engine-operated brick presses made from substantial steel sections with axle steel shaft with a top round shaft is case hardened carbon steel with a lid and with a bottom that moves up and down; the compression given by the machine compact the soil particles together to make dense regular shaped brick, usually 300x300x 130 mm in size and it is use  to produce interlocking soil clay bricks without burning. MANUFACTURING UNFIRED CLAY BRICKS This process uses the same type of clay use for the adobe brick. After the soil clay has been selected, it must be properly mix with Portland cement or gypsum then add water to the content so that the final product is a dry mixture containing about 15% water by weight. The dry mixture is poured in the mould of the press machine which is compress by pushing the press lever from one side to the other after closure of the top with a steel lid, with a force of about12 to 14 tons mould pressure. After the compression finish, the brick is eject from the machine and stack in the way to prevent water loss. Water is added daily so that the cement can be hydrated properly. The curing process will take about 28 days.   ADVANTAGES This Environmentally-sound building process is practical, inexpensive and  environmentallyHYPERLINK http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html  HYPERLINK http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.htmlfriendly, as well as significant in cost savings and on-going green benefits, building with unfired soil clay bricks is one of the solution for the housing crisis because it has a lot of environmental benefits. Figure 2 The environment is protected in several ways: It lessens the ecological impact of building construction, thereby reducing deforestation and the need kiln. There is hence no need to burn the bricks, which makes this process a very low-energy requiring one. It saves money as the brick can be made On-site eliminating transportation, middlemen and breakage cost. On the other hand, unfired clay brick provide a sustainable and healthy alternative as replacement to conventional masonry materials. The structures made with soil bricks are as beautiful and durable as housing made from conventional bricks with the higher acoustical qualities that shut out exterior noise for less stressful living and reduce the need to heat or cool the interior. The soil brick is suitable especially for use in multi storey buildings, due to its durability and robustness. The bricks are already strong enough to be handled for storage when they leave the machine. Brick presses allow countryside people to build independently their own affordable bricks to self-build their houses and not have to rely on salesmen and production in towns, bad roads, transport problems and fluctuating prices. CONCLUSION The lack of fossil fuels the world will face shortly will drive the world in an economical crisis which we havent experience before driving up the price of accommodation. Though the idea of compress clay bricks from soil is far from new in the developing country, but for some unknown  reasons this technology doesnt seem to have made its brake through the developed world. There is a need to implement this new product of a low carbon footprint in the building industry. REFERENCES http://sleekfreak.ath.cx:81/3wdev/VITAHTML/SUBLEV/EN1/CLAYPROD.HTM /how_242553_.html www.ibstock.com/pdfs/technical/TIS16howbrickaremade http://www.articlesfactory.com/articles/environment/soil-brick-making-machines-can-save-the-forests.html http://www.newdawnengineering.com/website/brickandtile/tbrick/ http://opus.bath.ac.uk/16170/1/papers/Paper%2031.pdf www.bia.org/bia/technotes/t9.html REPORT: Manufacturing of Bricks 9.12.2006 Publish: The Brick Industry Association www.gobrick.com/omnisam/common/getfile.cfm?file=/bia/technotes/t9 Access 20.03.2010 Careful humidity control Publish: Vaisala news 1998 Www. Vaisala.com Access 24.03.10 ABCs of making Adobe bricks Publish: College of agriculture and home economics New Mexico state university March 2003 www.aces.nmsu.edu Access 24.03.10 Websites Mineral information institute www.mii.org 16.03.10 Bright Hub www.brighthub.com 13.03.10 University College London www.es.ucl.ac.uk 13.03.10 Answer.com/reference answer www.answer.com 17.03.2010 How to make adobe bricks www.ehow.com 17.03.2010 How to make Adobe bricks www.doityourself.com 07.04.2010